Single Cell Pressurized Curing Chamber

Model: BSRD-7021S

Single Cell Pressurized curing chamber is designed and manufactured in strict accordance with API standard specification 10. Curing of test block used for oil well cement strength test under high temperature and high pressure.

The shell of the instrument is designed with all-stainless steel, which is durable for a long time; the key components of the entire instrument are all made of internationally renowned brands, and the overall structure and performance of the instrument have reached the world's advanced level.

Features

• The instrument uses Eurotherm controller to control the temperature through program editing and display the consistency value.
• Lid of pressurized curing chamber, It is a new design of our company，It replaces the sealing method of nut locking, and can ensure the long-term sealing of the pressurized Curing Chamber under low pressure and high pressure.
• A cooling device is installed on the high-pressure pipeline between the Curing Chamber and the pressure relief pump to ensure that the water temperature discharged from the kettle body to the pressure relief pump meets the requirements for long-term use of the pressure relief pump under the condition of constant pressure during the temperature rise.
• The cooling mode after the experiment is internal cooling mode, with high cooling efficiency.
• A gas-water separation device is added at the inlet front of the booster pump to prevent the unclean compressed air from entering the booster pump after the failure of the primary gas-water separation device, thus damaging the booster pump. This measure greatly increases the service life of the booster pump.
• Electric lifting, easy to disassemble and assemble the lid of the kettle.

Maximum Temperature: 707ºF / 375℃

Maximum Pressure: 5800 psi / 40 MPa

Maximum Operating Temperature: 572^OF /300℃

Maximum Operating Pressure: 4931 psi / 34Mpa

Power Supply: AC220V（±10 %）50Hz (It can be variable from country)

Heater Power: 8200 Watts

Number of Cubes: 8

Constant Temperature Accuracy: +/- 2ºF(1℃)

Operation Temperature: 50 to 122^OF / 10 to 50℃

Pressure Medium: Water

Compliance: API Spec 10A

Cooling Water: 14-58 psi / 0.1 – 0.4 MPa

Compressed Air: 58-102 psi / 0.3 – 0.7 MPa

Dimensions: 840mm×770mm×1870mm

Weight: 925 lb / 420kg