Stirred Fluid Loss
Model: BSRD-7071F
Stirred Fluid Loss is designed and manufactured in strict accordance with API specification 10. It is mainly used to measure the fluid loss of drilling fluid and cementing cement slurry under HTHP condition.
A magnetic stirring device is installed in the slurry cup of the Stirred Fluid Loss, which makes the fluid loss instrument more suitable for the test of the fluid loss of mud and cement slurry under HTHP. It can realize the mixing, curing and fluid loss measurement of mud and cement slurry inside the fluid loss instrument, avoiding the process of taking out from the Atmospheric consistometer and then pouring into the fluid loss instrument. The fluid loss test under HTHP condition is more accurate, and also increases the safety of equipment use.
Features
- Stirred Fluid Loss instrument adopts an advanced magnetic drive mixing device, which makes the blades in the slurry cup rotate at a uniform speed through magnetic drive, making the sealing of the instrument more reliable under HTHP condition, and the maintenance of the instrument more convenient.
- The heating and cooling system of the instrument is designed for special structure, with high heat exchange efficiency, practical and reliable, and convenient maintenance.
- The equipment is equipped with a timer alarm device, and the buzzer will alarm automatically after the test.
- Adopt threaded air source quick connection, which is safe, convenient, and reliable.
- The slurry cup of the Stirred Fluid Loss is machined from solid stainless steel bars. The screw seal is used between the slurry cup cover and the slurry cup at both ends, with good sealing performance and safe and reliable use.
Power Supply: AC220V（±10 %）50Hz (It can be variable from country)
Heater Power: 1200 Watts
Maximum Temperature: 500OF / 260℃
Maximum Pressure: 1029 psi / 7.1Mpa
Motor Speed: 150 +/- 15 rpm
Maximum Heating Rate: 5.4 OF /3 ℃/ min
Constant Temperature Control Accuracy：±1℃
Operation Temperature: 50 to 122OF / 10 to 50℃
Cooling Water: 14-58 psi / 0.1 – 0.4MPa;
Compliance: API Spec 10A
Slurry Cup Volume: 500 ml
Dimensions: 920mm*380mm*1450mm
Weight: 275 lb / 125 kg
